Little Bear Westsail 32 refit: Boom Install Blog #127

Arrrrr me hearties. Welcome aboard.

Putting the boom back in place should be a simple and straightforward little chore. Not so.

Once again, my ingenuity has been challenged and my DIY skills have been tested. The issue with this project was the bolts holding the boom in place on the mast. In my research I discovered that there isn’t a lot of stress placed on the up / down (vertical) travel of the boom. The bulk of the pressure is applied horizontally. When the sails are up and pulling, the boom is pressing into the mast. So with this bit of knowledge I wasn’t too concerned about the bolts in the mast.

With the old bolt holes stripped out I had the option of moving the goose-neck up above the old holes, or down, below them. I called the sail maker and asked what direction I should go. He responded that going up would be the appropriate choice. So that’s where the goose neck went – about 6″ higher than it was. This choice will come back to bite me in the bum at a later date.

Never-the-lesss, here’s how it went down:

As always fair winds, following seas, and God bless.

Advertisements

About DreadPirateBiff

Bit of a loon really.
This entry was posted in A Sailor's Life, About Boats, Maintenance, My Boat, Refit, Repair, Tools, Westsail 32, Yacht and tagged , , , , , , , , , , , , , , , , , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s